The Linn K9 and K18 metal bodies gave the cartridges a solidity which was obvious to the user as soon as they handled the cartridge on its own.  The finish was anodised which gave it a hard and silky feel. Whether black as in the K9, or the gorgeous red of the K18 (a finish also used on the iconic Troika MC), it exuded quality. Of course, the fact that those cartridges sported expensive styli was also a huge part of their performance package.

A freshly machined RigB 1 along-side a Linn K18



And then let’s not forget the ‘Stilton’ bodies of the late ‘80s. They took MMs (eg the A&R P77) and MCs and ‘pimped’ them up with simple metal bodies to great effect such that even A&R (by then called ARCAM) had to follow suit and make their own in-house.

A metal body is one of the ways in which cartridge manufactures differentiate their more expensive offerings. For instance, only when you get to the AT OC9X moving coil range, do AT offer a machined metal body for their cartridges.


We had wanted to make metal bodies for MM cartridges for some time and envisaged that there would be several models for different generator types/packages. We started with a body for the (no longer in official production) AT91.  This might seem an odd place to have started, but our rationale was as follows:

  • The AT91 continues to be sold ‘OEM’ to turntable manufacturers and is also readily available through the ‘grey’ market out of China on eBay etc.
  • Rega buy the 3600L on which the body & generator are the same as the AT91 and sell this badged as the ‘Rega Carbon’ and fit it to their entry level turntables.
  • The AT91 is a popular fit on Lenco turntables; a sector we wished to address with cartridge upgrades.
  • We had managed to secure a decent number of AT91 cartridges as ‘New Old Stock’ from AT when they stopped selling it (this was after the VM95 range was launched and the VM95C replaced the AT91). 

Like those we hoped would follow it, our first Metal Body model was made of CNC machined 6061-T6 aluminium alloy, but who to work with for its production? The Covid-19 Pandemic and its effects gave us an opportunity to get the time and attention of a small engineering company local to Gary that would normally be dedicating their resources to serve the Mercedes F1 Team.  They used a 5 axis CNC machine to produce a part in the fairly modest quantities we required.

A prototype red RigB 1 upside-down showing the machined cut-out for the generator yet to be fitted



The body replicates the originals geometry, holding the generator canister at the same angle and distance from the headshell. It provides a much more stable and secure interface for the generator canister by virtue of its material and the fact that the body cradles the canister along its flanks. For added security the generator canister was held in place with a couple of drops of bonding material making a very cohesive body/generator assembly.

The RigB cartridge body featured tapped holes (M2.5) meaning that it can be mounted from above with a pair of suitable screws without the need for nuts – thus simplifying fitting. It seemed to us that the market had been crying out for this for years and AT finally relented with their new VM95 range which has a threaded brass insert in the plastic body. 

A Prototype RigB 1 in red, viewed from above



The machined aluminium body weighs a little more than the plastic part it replaces (2.4g vs 0.6g) and the added mass is seen as a positive thing for performance; particularly so for the lower compliance options such as the Rega Carbon.  We have calculated that on a typical arm/cartridge combination, the resonant frequency of the whole will be lowered by about 0.6Hz so won’t risk taking it down into ‘warp territory’.  


So after some precision measuring, design work with a 3D modelling tool and initial prototypes, the first product (later named the RigB 1) was born!  It works with:  AT91, AT3600L and Rega Carbon cartridges.

We searched hard for a name and finally settled on ‘RigB’ – short for Rigid Body.

Rega Carbon mounted on a black RigB 1



A RigB model for the VM500 & VM700 ranges followed  (named the RigB 5) and then one for the VM95 range  (RigB 9).  Then In response to a fantastic suggestion by the guys at Collaro, a three point mount version of the RigB 5 was produced especially for Linn arms and others such as the superb PU7 from Audio Origami the TRigB. 

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

As our website is new, we're offering you 15% off our entire range. SImply enter the code LAUNCH15 in the shopping cart to receive your discount.

Close Welcome Bar