What is a RigB?
The RigB is a solid metal body/mount for (certain) Moving Magnet cartridges.
The name ‘RigB’ sums up what it is: A Rigid Body. (pronounced ‘Rigby’ as in ‘Eleanor Rigby’ the Beatles Song..)
When mounting the cartridge generator to your arm or headshell; a stable, rigid, non-resonating body is what is needed. For cartridge manufacturers that have costs and economics to juggle, a body/mount made of injection moulded plastic or powder moulded (sintered) metal is the low-cost way to go. And that’s what they tend to do.
Those who would prefer their cartridge to have a more optimised mounting solution can now choose a RigB option – and simply exchange the plastic or sintered body for much better one.
The RigB is a precision CNC machined piece of Heat treated 6061-T6 Aluminium (machined from billet). It has been designed and made to securely cradle the generator in its protective canister and support it with precisely the same geometry as the original plastic or sintered body.
By making a CNC machined alloy body, we have enhanced the stability of the generator which is a technique normally used only in very high end cartridges. Since any movement between generator and headshell is recorded information unretrieved, the RigB allows more of what was in the record groove to be captured and relayed up the chain.
As the guys behind the RigB; we (Simon Clark and Gary Hargreaves) absolutely love Audio Technica products. That’s why we have designed and made the first RigBs to fit well known AT models of Moving Magnet (MM) cartridge. There are three basic RigB models:
- RigB 1: This fits the AT91, 91R and 3600L models (and the Rega Carbon which is a rebadged AT3600L)
- RigB 5: This fits the AT VM500/700 range (and many older models such as the 440MLb and 120E)
- RigB 9: This fits the latest VM95 range (and the older AT95E generator and the XP series generators)
Additionally, we have created special three-point mount versions which allow cartridges in the VM500/700 range to be fitted with instant alignment to:
- Linn arms – The TRigB
- Rega arms – The RigB 3R
The idea of a precision-made body for a cartridge is nothing new. All, or at least most, cartridge manufacturers give their top models a similar treatment. The RigB allows anyone to get the best from their own cartridge.

Fitting a RigB
Fitting is fairly straightforward and can be done as a DIY task on most models. It involves removing the small screw that secures the generator canister to the body (on some models this screw is concealed under a label and this needs to be removed first). Then the plastic or sintered body is removed and the generator can fitted into the RigB. It is a snug fit. A tiny amount of a bonding agent (2-pack epoxy) is used to make the joint secure. (sufficient amount is included in our kit if you purchase for DIY assembly).
For those who don’t wish to do it themselves, we offer the option of performing the fitting to your cartridge at no further charge.
For more on the development of the RigB, see The RigB Story.
The TRigB
The TRigB is a Rigid Body designed specifically for use on Linn arms (as well as the Naim ARO & Tiger Paw Javelin) which have a third hole at the rear of the headshell. This means that the cartridge is not only very securely fitted to the headshell, but instantly aligned with the correct fore/aft position in the slots – no need for a gauge or protractor to set it up!
Like the ordinary RigBs, the TRigB is CNC machined from heat-treated aluminium alloy and has threaded holes for easy mounting to the arm headshell. Each of the three mounting points is surrounded by a small circular ‘land’ defining the mounting/contact surface precisely in those areas.

The TRigB has an extremely high quality-surface finish as befits a key component on perhaps the world’s most sought-after turntable. The TRigB fits any of the Audio Technica VM500 and VM700 MM cartridges, meaning that Audio Technica’s best MM generator and replaceable stylus assemblies can be easily and accurately fitted to Linn arms.
Ordering
The TRigB is available in red as the standard colour and comes complete with the three alloy screws (two long, one short) in the same colour. Other colours: e.g. black, gold, and blue available by request with colour-matched screws.
The TRigB is supplied only as part of a complete new cartridge or fitted (by us) to your own cartridge if you already have one. Either way, it is £199 (plus the cost of the cartridge if ordered from us). If your order is for one TRigB and one VM500 or VM700 cartridge, they will be supplied fully assembled and ready to fit.
If you are having your turntable serviced or worked on by a professional, why not ask them to supply the TRigB with your cartridge? They will either have it in stock, or they can get it directly from us. The development of the TRigB was completed in conjunction with the largest Linn Authorised dealers in England (Cymbiosis), and in Scotland (Loud and Clear, Glasgow).

Arm compatibility
The tonearms which suit the TRigB are:
- Linn Ekos SE
- Linn Ekos I and II
- Linn Akito (all versions)
- Linn Basik Plus
- Linn LVX
- Linn Ittok LVIII (mk1 and mk2)
- Linn Ittok LVII *
Note * The very earliest examples the Linn Ittok LVII have the ‘third hole’ but it is a fraction undersize to allow for easy clearance of the M2.5 screw. If it has never previously had a three-point mount cartridge fitted, it may be necessary to run a 2.5mm twist drill through the hole first. This is easily done and we can provide advice and assistance if needed.

The RigB 3R
RigB 3R – This is the RigB specifically-designed for Rega Turntables and Rega tonearms.

The RigB 3R is a variation of the RigB 5 which can accommodate cartridges from the Audio Technica VM500 and VM700 ranges (plus a few others besides). It has the same CNC-machined and anodised body, and a third mounting hole at the front. This third hole is positioned to ensure it locates the cartridge at precisely the correct forward/back position in the slots to give stylus alignment to Rega geometry.
Rega cartridge alignment is somewhat unique. Sometimes described as ‘near Stevenson‘ alignment, it conforms to none of the ‘traditional’ alignment solutions (Baerwald, Loefgren, Stevenson, etc). Whilst these other methods can be made to work on any turntable with a conventional tonearm, all Rega arms (since the original RB300) have a common arm length and arm mounting position. Therefore, Rega’s chosen cartridge alignment can be achieved every time by simply aligning the cartridge at exactly the same position on their headshell.
The RigB 3R allows Rega turntable owners to get the benefit of superb cartridges from Audio Technica with all the advantages of transducers designed and made by a company who have been at the top of the game for more than 60 years. The option to replace or upgrade stylus assemblies without the need to replace the whole cartridge is a benefit appreciated by everyone who has worn out a stylus or accidentally damaged one of these (necessarily delicate) items.
Quick and easy fitting
With a conventional ‘two screw’ mounting, you must determine how far forward or back in the slots the cartridge should be set using an alignment gauge or protractor. This often involves multiple attempts to get it right. With a three-screw mount, this correct position is assured first time with the forward screw in its hole. With a RigB 3R, as long as the arm is a Rega one and it’s mounted on a Rega turntable, the cartridge alignment will be instantly correct to Rega’s chosen geometry.
The RigB 3R is supplied with the three anodised alloy screws and, thanks to a small stepped washer (included), it can be used with the older arms which have the larger headshell hole as well as the later ones which have an M2.5 clearance hole.
Fitting a RigB 3R modified cartridge could hardly be simpler. Attach the four cartridge tags and then mount the cartridge with the forward screw ensuring correct ‘fore/aft’ positioning. The other two screws will then find their own position within the slots (this can all be done with the removable stylus assembly safely out of the way). Then clip on the stylus assembly, set the tracking force (2.0g) and the bias and you are away!
But what about arm height?
If you are wondering whether the arm height needs to be adjusted, it’s worth pointing out the following: Firstly, the RigB 3R preserves the geometry of the standard Audio Technica cartridge and Rega are very happy to fit another AT cartridge with similar geometry to their turntables (The Rega Carbon – which is made by AT). Secondly, Rega point out that having an arm a little off ‘horizontal’ doesn’t really make any difference (read what Roy Gandy has to say on the subject).
Finally, we would point out that the choice of platter mat probably has a bigger effect on ‘arm height’ than anything else. So, for instance, anyone tempted to add a shim under their arm would do better to swap out their (usually) thicker cheap mat and invest in one of the thin and exceptionally well made mats by Collaro such as the Mat Black, or their new White mat (which is the same as the one specified on Rega’s high-end ‘Naia’ turntable.

These excellent Collaro Mats can be ordered here.
Buying a RigB 3R
The RigB 3R is available either as a kit with instructions to fit it to your existing Audio Technica VM500 or VM700 series cartridge or you can buy it fully assembled to a new VM540ML cartridge and stylus. It is available in red or black. To purchase a RigB 3R, please Click Here.

Superbly engineered Rega turntable and arm, complimented by RigB 3R VM540ML and Collaro Mat Black
