How Not To Set Bias / Anti-Skate

Here is the long-winded explanation of why a CD is no help in setting Anti-Skate. Don’t bother reading this unless you really need convincing… Otherwise, life is too short.  Go and play some records instead…  



Bias (Anti-Skate) is a force applied to the arm which tends to make it want to swing outwards and is needed to counteract the ‘centre seeking’ force that the stylus is under when playing a record due to the rotation of the record and the friction of the stylus in the groove. The more the friction, the more bias is needed (which is why the greater the tracking force used, the greater the bias needed).

If it’s not clear that stylus/groove friction is pulling the stylus towards the centre, imagine if the friction was infinite and the stylus was stuck to the record at one point.  As the record rotated, it would pull the arm straight across towards the centre (until something broke). The ‘blank record test’ (or worse still, the ‘back of a CD test’) is, at best, a very crude method for setting bias (anti-skate). It relies on the assumption that when resting on a moving piece of blank vinyl, the stylus will experience the same friction that it does in a real record groove.



This is only likely to be even close to true when using conical or elliptical styli. Most advanced stylus profiles are ‘sharper’ than the radiused point of the simple stylus types and so tend to ‘dig in’ to the smooth surface and give a false reading of ‘groove friction’ which can be wrong by several orders of magnitude. In truth, when it is in the groove, the ‘point’ of the stylus touches nothing, it is the sides of the stylus that touch the groove walls.  So, the ‘blank Vinyl’ test simply doesn’t work – especially for better stylus types. 

To make matters worse, the surface of a CD is not even ‘vinyl’ but polycarbonate with a protective lacquer.


If you try this method, what you are likely to see is the suggestion that you need to dial in more bias to compensate for the excess friction being experienced on the blank disc.  

Talk to any seller of decent tonearms or cartridges and they’ll tell you tales of customers who claimed they couldn’t get enough bias out of their arms even when set to the maximum!  The blank vinyl (or ‘CD’) test was always behind it.

For the real solution, see our article on How to set Bias.

Comments

One response to “How Not To Set Bias / Anti-Skate”

  1. Mario Georgiou avatar
    Mario Georgiou

    I will admit freely that I tried setting the ani-skate with a flat groove less test disc. A well known expert laughed at me, and to my shame he was right. That disc has never since seen sunlight.
    I have learned much since then, and I’m happy with the lower level of anti-skate that I seem to need.

Leave a Reply

Your email address will not be published. Required fields are marked *

As our website is new, we're offering you 15% off our entire range. SImply enter the code LAUNCH15 in the shopping cart to receive your discount.

Close Welcome Bar